Key Features & Performance
- MERV 13 filtration with 3 fan speeds to optimize air changes per hour for your space
- In-ceiling air cleaning works up to 35% more effectively than floor-based air cleaning and is part of a long-term strategy to improve indoor air quality**
- Quiet operation – as low as 29 dBA***
- 24" x 24" design allows for easy installation in any suspended ceiling system – easy to incorporate in new or retrofit in existing spaces, with no HVAC system integration required
- Energy efficient design uses only 15 watts per hour – less than a traditional incandescent light bulb***
- Integrates with occupancy sensors to save energy and maximize clean air while the space is occupied
- One unit filters the air for a 1,000 SF space every hour (1 filter = 1 Air Change per Hour (ACH) for a 1,000 SF space; up to 2 ACH can be achieved at a higher setting)
- In-room air filtration recommended by the EPA Clean Air in Buildings Challenge
- Can provide up to 2 additional ACH in a 1,000 SF room.
* MERV 13 filter is at least 85% efficient at capturing particles in 1 µm to 3 µm size range. Source < https://www.ashrae.org/technical-resources/filtration-and-disinfection-faq >
** A simulation study performed by JB&B showed that for equivalent cubic feet per minute (CFM), in-ceiling air purification delivered up to 35% lower particle concentration than a floor-based air purification unit across all sampled inhalation zones.
*** Operating at 150 CFM fan speed