Performance
- SHORTSPAN Cross Tees
- Easy, pre-engineered solution to support spans up to 8’-6’’ with no independent support
- SCREWSTOP reverse hem prevents screw spin-off
- Balanced profile stays flat during installation
- Locking Angle Molding
- Pre-engineered locking tabs punched 8" on center:
- Eliminate measuring 16" or 24" O.C.
- Locking tabs prevent lateral and upward movement
- Eliminate screws, pop rivets, or crimpers needed to attach cross tees to molding
- Pre-engineered locking tabs punched 8" on center:
|
||||||||
---|---|---|---|---|---|---|---|---|
Hanger Spacing |
4' - 4.27plf
|
* Not all systems for use in all UL designs
Material | Hot-dipped Galvanized Steel |
---|---|
Cross Tee/Main Beam Interface | Override |
End Detail | Staked-on clip (XL) |
Feet (Ft / Carton) | 216 |
Pieces / Carton | 36 |
Visual
Length | 72" |
---|---|
Face Profile | 1-1/2" |
Height | 1-1/2" |
Profile Type | Drywall/Stucco/Plaster |
Component Type | Cross Tee |
Sustainability Profile
Videos
ShortSpan Corridors | 2:52
Tailgate Talk: ShortSpan | 3:51