Performance
- SHORTSPAN Cross Tees
- Easy, pre-engineered solution to support spans up to 8’-6’’ with no independent support
- SCREWSTOP reverse hem prevents screw spin-off
- Balanced profile stays flat during installation
- Locking Angle Molding
- Pre-engineered locking tabs punched 8" on center:
- Eliminate measuring 16" or 24" O.C.
- Locking tabs prevent lateral and upward movement
- Eliminate screws, pop rivets, or crimpers needed to attach cross tees to molding
- Pre-engineered locking tabs punched 8" on center:
|
||||||||
---|---|---|---|---|---|---|---|---|
Duty Rating | Heavy Duty | |||||||
Hanger Spacing |
4' - 18.76plf
|
|||||||
Seismic Category
**
|
DEF |
* Not all systems for use in all UL designs
** Not all components can be used in all seismic categories
Material | Hot-dipped Galvanized Steel |
---|---|
Cross Tee/Main Beam Interface | Flush fit |
End Detail | Staked-on clip |
Feet (Ft / Carton) | 144 |
Pieces / Carton | 12 |
Visual
Length | 144" |
---|---|
Face Profile | 1-1/2" |
Height | 1-1/2" |
Profile Type | Drywall/Stucco/Plaster |
Component Type | Main Beam |
Sustainability Profile
Videos
SHORTSPAN Corridors | 2:52
Tailgate Talk: SHORTSPAN | 3:51