Morehead State University | Drywall Grid System


The Challenge:

When designing the newly renovated and expanded Adron Doran University Center at Morehead State University, Sherman Carter Barnhart Architects, Lexington, KY, wanted to find a way to infuse the existing student center with natural light.

“The old building, because of its structure and design, didn’t let light into the building,” explains project architect Michael Leland Smith. “When adding on to the building, we would create even larger floor plates, which would make the building even darker. So, what we wanted to do was insert something between the new and old building that would bring a lot of natural light deep into the building.”  

The Solution:

By including a light well in the new addition to the three-story building, the design team was able to infuse the third-floor hallway with light and direct it down the open stairwell to the first and second floors below. “We created a light well to bring light down into the building so that it would be a high-quality, inviting sustainable space,” says Smith. The light well consists of clerestory windows that extend the length of the third-floor hallway and curved drywall soffits that bounce light from the windows onto the floors below.

All the curved soffits, including the uniquely shaped curved vault above the entrance to the third-floor stairwell, were created using an Armstrong Drywall Grid System. “You couldn’t have created those types of curves to that degree with metal stud framing,” explains Smith. “The Drywall Grid System allowed us the flexibility of design to create the effect we wanted in terms of opening the space and softening the light to get the quality we were looking for.”

Working with the radiuses provided by the architect, installer Valley Interior Systems, Lexington, KY, formed the drywall grid into the shapes required for the soffits, attached them to the wall, and applied two layers of quarter-inch drywall to the shapes. “Drywall grid comes to us as straight pieces,” says Troy Vance, Senior Vice-President, Southern Operations, Valley Interior Systems. “We have to lay it out, create a template, and form all the metal to the template. What’s nice about the Armstrong Drywall Grid System is that it’s very receptive to making those curves versus regular drywall studs which are a lot harder to notch and can’t form or shape in the same manner.”

Assuring that no seams or other imperfections would be visible, the installer applied a base and mesh finish to the soffits. “That smoothed out the curves and gave the lightwell the smooth, natural finish the architect wanted,” says Vance.

Project: Morehead State University Student Center

Location: Morehead, KY

Architect: Sherman Carter Barnhart Architects

Products: Drywall Grid System