Accessories and Moldings - Seismic

Installation

Accessories

SJCSI
SJCSI
Component Type
  • Clip
Pieces Per Carton
  • 200
Seismic Joint Clip CT (square bulbs)
Used For
Offers a tested seismic solution for separation joints in Seismic Category D, E, and F installations.
SH12
SH12
Component Type
  • Accessory
Pieces Per Carton
  • 12
Support Hanger
Used For
For suspension systems 12" knock out at 12" on-center.
TZBC
TZBC
Component Type
  • Clip
Pieces Per Carton
  • 100
TechZone Bracing Clip
Used For
Used to connect cross tees to the main beam of the continuous technical zone when no yoke is present.
SJMR9
SJMR9
Component Type
  • Clip
Pieces Per Carton
  • 100
Seismic Joint Clip - Main Beam (for 9/16")
Used For
Allows the ceiling to be divided at a splice on the main beam to accommodate the IBC mandate for ceiling areas greater than 2500 SF to have seismic separation joints. ES4 expansion sleeve is used to cover 3/4" gap
SJCG
SJCG
Component Type
  • Clip
Pieces Per Carton
  • 200
Seismic Joint Clip CT (PeakForm)
STAC
STAC
Component Type
  • Clip
Pieces Per Carton
  • 120
Single Tee Adapter Clip
Used For
to create code compliant non-seismic and seismic C and D, E, F off-module single tee to main beam connection.
AXSJ
AXSJ
Component Type
  • Transition
Pieces Per Carton
  • 1
Axiom Slip Joint
Used For
to join two acoustical ceiling systems on seismic D, E, F installations. Can also be used to join two different ceiling systems. Hanger wire holes every 6”, beginning 3" from each end.
BERC2
BERC2
Component Type
  • Clip
Pieces Per Carton
  • 200
2" Beam End Retaining Clip (steel)
Used For
Joins main beam or cross tee to wall molding with no visible pop rivets.(steel)
ES49
ES49
Component Type
  • Accessory
Pieces Per Carton
  • 100
Expansion Sleeves (for 9/16")
SJMR15
SJMR15
Component Type
  • Clip
Pieces Per Carton
  • 100
Seismic Joint Clip - Main Beam (for 15/16")
Used For
Allows the ceiling to be divided at a splice on the main beam to accommodate the IBC mandate for ceiling areas greater than 2500 SF to have seismic separation joints. ES4 expansion sleeve is used to cover 3/4" gap
BERC
BERC
Component Type
  • Clip
Pieces Per Carton
  • 200
Beam End Retaining Clip
Used For
Joins main beam or cross tee to wall molding with no visible pop rivets.
6091
Component Type
  • Accessory
Pieces Per Carton
  • 50
Safety Cable
FXSPTHDC
Component Type
  • Clip
Pieces Per Carton
  • 10
Effects Hold Down Clip
7445
7445
Component Type
  • Accessory
Pieces Per Carton
  • 100
Stabilizer Bar
Used For
maintaining uniform spacing of suspension system components (main beams and cross tees).
7425
7425
Component Type
  • Accessory
Pieces Per Carton
  • 100
Stabilizer Bar
Used For
maintaining uniform spacing of suspension system components (main beams and cross tees).
TZYK
TZYK
Component Type
  • Accessory
Pieces Per Carton
  • 100
TechZone Yoke
Used For
Create a sleek ceiling design with uninterrupted ribbons of light
GC3W
GC3W
Component Type
  • Clip
Pieces Per Carton
  • 250
3 Way Grip Clip
Used For
Joins main beams to cross tee via locking barbs without pop rivets or screws.
ALBERC2
ALBERC2
Component Type
  • Clip
Pieces Per Carton
  • 200
Aluminum Beam End Retaining Clip
Used For
Joins main beam or cross tee to wall molding with no visible pop rivets.
7870
7870
Component Type
  • Clip
Pieces Per Carton
  • 1000
Spring Border Clip
Used For
installations with the panel resting on the wall molding
5594
Component Type
  • Accessory
Compression Strut
BACG90
BACG90
Component Type
  • Clip
Pieces Per Carton
  • 250
Wind Uplift Clip
QSUTC
QSUTC
Component Type
  • Clip
Pieces Per Carton
  • 150
Rigid Attachment Clip
Used For
Saves time in tight plenum areas and is adjustable to uneven surfaces.
GCWA
GCWA
Component Type
  • Accessory
Pieces Per Carton
  • 250
Grip clip wall attachment
Used For
Joins main beam or cross tee to wall molding via locking barbs without pop rivets or screws.
ES4
ES4
Component Type
  • Accessory
Pieces Per Carton
  • 100
Expansion Sleeves (for 15/16")
GA7327
GA7327
Component Type
  • Accessory
Pieces Per Carton
  • 60
Grid Adapter
BACG90A
BACG90A
Component Type
  • Clip
Pieces Per Carton
  • 250
Wind Uplift Clip
SB12
SB12
Component Type
  • Accessory
Pieces Per Carton
  • 12
Square Bulb Support Hanger
Used For
For suspension systems 12" knock out at 12" on-center.
ES76004
ES76004
Component Type
  • Accessory
Pieces Per Carton
  • 200
Expansion Sleeves (for 1/4")
ES76008
ES76008
Component Type
  • Accessory
Pieces Per Carton
  • 200
Expansion Sleeves (for 1/8")
414
414
Component Type
  • Clip
Pieces Per Carton
  • 100
Retention Clip
  • BERC2 – Beam End Retaining Clip

    The Berc2 clip or beam end retaining clip eliminates two-inch wall angle in Seismic D, E, and F and in C installation it allows for easier installation. Learn more in this short video.